skip to Main Content

TimeSavers sells Jib Cranes from the world’s leading Crane Manufacturers, including Gorbel, SPANCO, and EMH. Various styles are available to work for many situations, depending on your company’s needs. Free Standing, Wall-Mounted, Articulated, Wall-Traveling and more are available.

We are a major authorized distributor for over a hundred material handling manufacturers. This page shows a sampling of the Jib Cranes that we provide. To get more information on our entire Jib Crane solutions, as well as find the exact solution you are looking for, please contact us directly.

Jib Cranes are very versatile cranes. They are perfect to place underneath large bridge cranes, in open areas where they can serve several workstations, in outdoor applications such as loading docks, or in machining and assembly operations where they can be overlapped with other jibs to provide staged operation.

Features & Benefits

  • Independent head assembly installs separately for ease of installation
  • Full supporting triangular base plate gussets are used instead of struts to minimize crane deflection and make positioning loads easier

Applications

  • Circular coverage areas
  • Outdoor applications such as loading docks
  • Applications underneath large bridge cranes
  • Machining or assembly applications

Capacity:  Up to 10000 lbs

Coverage:  Circular, Standard spans to 20′

360 degree rotation

3 Mounting styles; base plate mounted, sleeve mounted, insert sleeve mounted

The Wall Cantilever Jib Crane provides hoist coverage and 200° rotation for individual use in bays, along walls or columns of plants, or as a supplement to an overhead crane or monorail system. The jib provides maximum lift for the hoist, since it can be installed very close to the underside of the lowest ceiling obstruction.

Features & Benefits

  • Requires very little headroom, so it can be installed very close to the underside of ceilings to provide maximum lift for your hoist

Applications

  • Hoist coverage along walls or columns
  • Individual use in bays
  • Supplement to an overhead crane or monorail

Capacity:  Up to 10000 lbs

Coverage:  Circular, Standard spans to 20′

200 degree rotation

Requires a structurally adequate wall or column to mount to

Welded or bolted connection depending on bracket centers

This type of jib crane is floor supported, top stabilized, and is capable of 360° rotation. The efficient design usually requires no special foundation, making them the most cost effective of the 360° rotation jib styles.

Features & Benefits

  • No special foundation required, making it the most economical of the 360 degree rotation jibs
  • Full Cantilever option provides maximum amount of lift where full use of available headroom is desired
  • Drop Cantilever option allows for specific placement of the boom to clear overhead obstructions

Applications

  • Heavier loads from 1 to 5 ton
  • Often used when the thrust and pull exerted by other crane types is too great
  • Economical enough to dedicate to a single work cell
  • Supplement a larger overhead crane
  • Localized handling

Capacity:  Up to 10000 lbs

Coverage:  Circular, Standard spans to 20′

MT400 Full Cantilever – Provides maximum amount of lift where full use of available headroom is desired

MT450 Drop Cantilever – Jib boom can be placed at a specific height to clear overhead obstructions
360 degree rotation

Free standing work station jib cranes can be bolted directly to your existing floor without adding special foundations. Installation and adjustments are made easy with eccentric cam followers.

Features & Benefits

  • Most can be bolted directly to existing floors without adding special foundations
  • A retaining pin through the pivot pin helps resist accidental upward dislodgement of the boom assembly

Applications

  • Circular areas not sufficiently covered by a main crane
  • Supporting tool balancers, air balancers, hoists, vacuum lifters and welding wire feeders

Capacity:  Up to 1000 lbs

Coverage:  Circular, Standard spans to 16′

360 degree rotation

Designed to support tool balancers, air balancers, vacuum lifters, and hoists

Wall mounted work station jib cranes use tapered roller bearings at the pivot points for unsurpassed ease of rotation. The cantilevered design allows for maximum headroom.

Features & Benefits

  • Available in steel (all capacities) or stainless steel (capacities to 500 lbs.)
  • Uses an enclosed track for the boom assembly, which reduces dead weight for easier rotation

Applications

  • Circular areas not sufficiently covered by a main crane
  • Supporting tool balancers, air balancers, hoists, vacuum lifters and welding wire feeders

Capacity:  Up to 1000 lbs

Coverage:  Circular, Standard spans to 16′

200 degree rotation

Can be mounted to a wall or column

The Free Standing Articulating Jib Crane is perfect for applications that demand the use of an articulating jib, but there are no walls or columns to mount the crane. This crane offers effortless rotation and a consistent responsiveness when positioning loads in a work cell, through open doorways, or into machines.

Features & Benefits

  • Installation: floor mounted, easy to install
  • Effortless rotation
  • Special foundations may be required – contact factory for assistance

Applications

  • Circular coverage area
  • Moving loads around corners or through doorways
  • Reaching loads into machines
  • Swinging loads under obstructions

Capacity:  Up to 2000 lbs

Coverage:  Circular, Standard spans to 16′

360 degree rotation at each pivot point

Can be used with hook mounted lifting devices (electric, air, or vacuum)

Ceiling mounted articulating jib cranes can be stationary mounted or platform supported from a dual girder bridge crane, which allows usage outside the normal coverage of a bridge crane or the jib to swing under obstructions. With the jib mounted to a platform, many work cells can be covered with just one crane and lifting device.

Features & Benefits

  • Mounted overhead, no disruption to workflow in work cell
  • Compact design requires minimal overhead clearance for installation

Applications

  • Circular coverage area
  • Moving loads around corners or through doorways
  • Reaching loads into machines
  • Swinging loads under obstructions

Capacity:  2000 lbs

Coverage:  Circular, Standard spans to 16′

360 degree rotation at each pivot point

Can be used with hook mounted lifting devices (electric, air, or vacuum)

Can be mounted to a platform supported from a bridge crane to swing outside the normal coverage of a bridge crane (limited to certain capacities and spans)

The Wall mounted articulating jib crane is perfect for applications that require maneuvering around or under obstructions and there is an adequate wall/column to support the crane.

Features & Benefits

  • Up to 200 degree rotation in the primary boom and 360 degree in the secondary boom
  • Provides a clear work area with no floor obstructions and requires minimal overhead clearance for installation

Applications

  • Circular coverage area
  • Moving loads around corners
  • Reaching loads into machines or through doorways
  • Swinging loads under obstructions

Capacity:  Up to 2000 lbs

Coverage:  Circular, Standard spans to 16′

200 degree rotation on the primary boom

Recent Industry News