skip to Main Content

Conveyor Systems are one of the most important aspects of the production of goods. Nearly everything that is manufactured or mass-produced has to travel along conveyors at some point. TimeSavers offers powered conveyors from the markets leading manufacturers, including LewcoInc, Omni Metalcraft, and Roll-A-Way Conveyors.

We are a major authorized distributor for over a hundred material handling manufacturers. To get more information on our entire conveyor systems solutions, as well as find the exact solution you are looking for, please contact us directly.

A Belt-Driven Live Roller Conveyor is a versatile way to convey products of various shapes, sizes and weights. Products such as boxes, cases, drums and totes are ideal for the bolt together product line. Accumulating, diverting, merging and transportation are all normal applications for this type on conveyor. When conveying much heavier loads such as appliances and loaded pallets, welded construction would be a more suitable choice.

Capacity:  300, 360, 1280 lbs

Frame Sizes:

  • 6 1/2 deep x 1 1/2” flange x 12ga.
  • 6 1/2” deep x 1 1/2” flange x 10 ga.
  • 7 1/2” deep x 1 1/2” flange x 10 ga.

Between Frame Widths:  13” to 99”

Roller Specifications:  1.9” x 16 ga.& 2.5” x 11 ga.

Motor:  ½ HP – 230/460V-3ph-60hz-TEFC-1750 RPM

Motor Voltage:  115V – 575V

The Line Shaft Conveyor is a quiet and efficient live roller conveyor system. These systems are primarily suitable for lighter loads. Each roller is powered individually by spools, which are connected fully by a composite “O” ring or band. Large, long systems can be run with a single drive shaft, which includes curves, pop-up transfers or spurs.

Applications:

  • Convey loads of Cartons, Totes, Fixtures, Cardboard Boxes
  • Non-Contact Accumulation
  • Zone Based
  • Single load release when discharging products
  • Moderate Incline/Decline/Curve/Transfers with same drive

Capacity:  300, 360, 1280 lbs

Frame Sizes:

  • 6 1/2 deep x 1 1/2” flange x 12 ga.
  • 6 1/2” deep x 1 1/2” flange x 10 ga.
  • 7 1/2” deep x 1 1/2” flange x 10 ga.

Between Frame Widths:  13” to 99”

Roller Specifications:  1.9” x 16 ga.& 2.5” x 11 ga.

Motor:  ½ HP – 230/460V-3ph-60hz-TEFC-1750 RPM

Motor Voltage:  115V – 575V

Chain Driven Live Roller Conveyors provide a positively driven, heavy duty, live roller conveyor. Because of the positive chain and sprocket drive, it’s an ideal choice for conveying pallets, containers, drums and other heavy unit loads. It’s also well suited for dirty or oiling environments, where other types of live roller conveyors won’t perform.

Applications:

  • Unitized
  • Totes or slab Pallets not strong enough to be supported by chain conveyor
  • Pallet loads when bottom boards are perpendicular or parallel to the rollers
  • Side loading/unloading
  • Accumulation of loads
  • Loads that must be aligned

Effective Width:  6” – 84”

Length:  36” – 960”

Degrees (curved conveyors only):  45°, 90°, 180°

Elevation:  6.5” – 120”

Speed:  10 – 150 FPM

Roller Diameter:  2.50”, 11 ga wall tube 2.625”, 7 ga wall tube

Roller Centers:  3” – 12”

Motor:  ½ – 2 HP

Motor Voltage:  120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC voltage

Powered conveyors can be used in an unlimited variety of products, such as small parts, containers or cartons. They are typically used for packaging, shipping and assembly. Using these conveyors are an economical method of moving medium weight products.

Capacity:  300-900 lbs

Belt Width:  12” – 30”

Bed Width:  16” – 34”

Length:  5 – 30 ft.

Weight:  261 – 830 lbs

Speed:  60FPM

Drive Pulley:  4”

Motor:  ½ HP

Motor Voltages:  220/3/60 voltage

Horizontal Belt Conveyors are designed to move products and materials from one department to the other. Each roller helps minimize belt friction, allowing for greater capacities.

Capacity:  1000 lbs

Belt Width:  12” – 24”

Overall Width:  18” – 30”

Length:  5 – 30 ft.

Weight:  250 – 848 lbs

Speed:  60FPM

Drive Pulley:  4”

Motor:  ½ HP

Motor Voltages:  220/3/60 voltage

Slat Conveyors are designed for heavy duty applications and long lasting service. They can be used for production, assembly line, and many other applications where a flat conveying surface is desired. This type of conveyor is also suitable for conveying items that have an irregular shape, as well as those with hot and oily parts. Conveyor slats can be modified for mounting assembly fixtures as well.

Width:  13″ – 49″

Length:  120” – 1200”

Elevation:  17” – 48”

Speed:  15 – 45 FPM

Roller Diameter:  2”

Motor:  ¾ – 5 HP

Motor Voltages:  120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC voltage

Recent Industry News

Material Handling

Material handling is the movement, protection, storage and control of materials…

read more
Gravity Roller Conveyor System

WHY MORE GROWTH AWAITS THE MATERIAL-HANDLING EQUIPMENT INDUSTRY

Material-handling equipment new orders grew 7.0 percent in 2013 and…

read more

4 Things To Look Out For In The Future For Material Handling

Material handling is an evolving art form and the components…

read more

​Top 5 Costs Of Material Handling

Material handling costs are constantly adding up. Many business leaders…

read more